Engravers Accessories* |
|
| Milling |
|
| Part No |
Description |
Price |
| BM-250-2F-250 | Carb. end mill, 1/4in shank, 2-flute ball | $49.99 |
| EM-125-2F-125 | DISCONT'D,Carb end mill, 1/8in shank, 2-flute flat | $19.99 |
| EM-250-2F-250 | Carb. End Mill, 1/4in Shank, 2-Flute Flat | $24.99 |
| EMB-125-3F-016 | Carb. end mill, 1/8in 1/64in,tip,3-flute ball | $56.99 |
| EMB-125-3F-031 | Carb. end mill, 1/8in 1/32in,tip,3-flute ball | $44.99 |
| EMB-125-3F-063 | Carb. end mill, 1/8in,1/16in tip,3-flute ball | $44.99 |
| EMB-125-3F-125 | Carb. end mill, 1/8in,1/8in tip,3-flute ball | $44.99 |
| EMF-125-3F-016 | Carb. end mill, 1/8in,1/64in tip,3-flute flat | $49.99 |
| EMF-125-3F-031 | Carb. end mill,1/8in,1/32in tip, 3-flute flat | $39.99 |
| EMF-125-3F-063 | Carb. end mill,1/8in,1/16in tip,3-flute flat | $39.99 |
| EMF-125-3F-125 | Carb. end mill, 1/8in, 1/8in tip, 3-flute flat | $39.99 |
| ZC-E436 | Bottom load, burnishing guide for EGX-400/600 | $29.99 |
|
| Engraving |
|
| Part No |
Description |
Price |
| AS-10 | Adhesive Sheet Hold-down System (pack of 10) | $34.99 |
| BT-125-010 | Burnish Tool, 1/8in shnkx4.5in lgthx.010in tip | $17.00 |
| BT-125-015 | Burnish Tool, 1/8in shnkx4.5in lgthx.015in tip | $17.00 |
| BT-125-030 | Burnish Tool, 1/8in shnkx4.5in lgthx.030in tip | $17.00 |
| BT-171-010 | Burnish Tool,11/64in shnkx6.5in lgthx.010in tip | $23.00 |
| BT-171-015 | Burnish Tool,11/64in shnkx6.5in lgthx.015in tip | $23.00 |
| BT-171-030 | Burnish Tool,11/64in shnkx6.5in lgthx.030in tip | $23.00 |
| BT-EGX3-125 | Burnishing Adapter for EGX 30/300, CS-20 | $129.99 |
| C2-125-010K | Carb. Engr Cutter, .010in, 1/8in Shnk, W/Knob | $19.00 |
| C2-125-015K | Carb. Engr Cutter, .015in, 1/8in Shank, W/Knob | $19.00 |
| C2-125-030K | Carb. Engr Cutter, .030in, 1/8in Shank, W/Knob | $19.00 |
| C2-125-060K | Carb. Engr Cutter, .060in, 1/8in Shank, W/Knob | $19.00 |
| C2-125-090K | Carb. Engr Cutter, .090in, 1/8in Shank, W/Knob | $19.00 |
| C2-125-125K | Carb. Engr Cutter, .125in, 1/8in Shank, W/Knob | $19.00 |
| C2-125-DGK | Diamond Gravers, non-rotary, 1/8in shank, W/knob | $24.00 |
| C2-125-KNOB | Threaded Brass Knob for 1/8in shank engr tools | $4.00 |
| C2-171-010K | Carb. Tip Engr Cutter, .010in 11/64inShnk W/Knob | $25.00 |
| C2-171-015K | Carb. Tip Engr Cutter, .015in 11/64inShnk W/Knob | $25.00 |
| C2-171-030K | Carb. Tip Engr Cutter, .030in 11/64inShnk W/Knob | $25.00 |
| C2-171-060K | Carb. Tip Engr Cutter, .060in 11/64inShnk W/Knob | $25.00 |
| C2-171-090K | Carb. Tip Engr Cutter, .090in 11/64inShnk W/Knob | $25.00 |
| C2-171-125K | Carb. Tip Engr Cutter, .125in 11/64inShnk W/Knob | $25.00 |
| C2-171-171K | Carb. Tip Engr Cutter, .171in 11/64inShnk W/Knob | $25.00 |
| C2-171-DGK | Diamond Gravers,non-rotary,11/64in shank, W/knob | $27.00 |
| C2-171-KNOB | Threaded Brass Knob for 11/64in shank Engr tools | $4.00 |
| CV-EGXPRO | Center Vise for EGX 400/600 | $599.00 |
| DGA-BEDLVL-KIT | Bed Leving Kit, for PNC-2300 CAMM-2 | $49.99 |
| DRN-20 | BEARING ASSY CS-20 (3-pack) | $40.00 |
| EGX20-KIT | Engraving Accessories Starter Kit for EGX-20 | $439.99 |
| EGX300-KIT | Engraving Accessories Starter Kit for EGX-300 | $1,350.00 |
| EGX46XX-KIT | Engraving Accessories Starter Kit for EGX-400/600 | $1,110.00 |
| HS-171-005K | Hi-Spd Steel Cutter 11/64inshnk 6.5in .005in tip | $25.00 |
| HS-171-010K | Hi-Spd Steel Cutter 11/64inshnk 6.5in .010in tip | $25.00 |
| HS-171-015K | Hi-Spd Steel Cutter 11/64inshnk 6.5in .015in tip | $25.00 |
| HS-171-030K | Hi-Spd Steel Cutter 11/64inshnk 6.5in .030in tip | $25.00 |
| RP-125-BRL020K | Carb ADA Braille Dot Cutter, 1/8in Shank, W/Knob | $28.00 |
| RP-125-COL020K | Carb. ADA Cut-Out Ltr Cutter, 1/8in Shnk, W/Knob | $22.00 |
| RP-171-BRL010K | DISCONCarb ADA braille dot cutter,11/64"shk w/knob | $38.99 |
| RP-171-BRL020K | Carb. ASA braille dot cutter, 11/64" shank w/knob | $38.99 |
| RP-171-COL010K | Carb. ADA braille cut out tool,11/64" shank w/knob | $32.99 |
| RP-171-COL020K | Carb. ADA braille cut-out tool,11/64" shank w/knob | $32.99 |
| US-CHIPSYS-C | Chip Extraction Sys. UltraQuiet, 1/2hp w/accumltor | $699.99 |
| US-FLTRBAG-A3 | Filter bag (3-pk) for chip removal system | $42.00 |
| US-TL125-KIT | engr Tool Starter Kit, 1/8in tools with holder | $110.00 |
| US-TL171-KIT | Engr Tool Starter Kit, 11/64in tools w/holder | $130.00 |
| ZAD-600 | Vacuum Adapter for EGX-400/600 | $189.99 |
| ZB-20 | Burnishing attachment for EGX-20 | $85.00 |
| ZC-23-3 | Collet, 3mm for EGX-300/400/600, JWX-10, MDX-40 | $38.99 |
| ZC-23-3175 | Collet, 3.175mm PNC-2300A | $34.99 |
| ZC-23-635 | Collet,1/4in(6.35mm)PNC-2300A/MDX-500 | $34.99 |
| ZDC-A2000 | Diamond Gravers, non-rotary 1/8in shnk, w/knob- | $74.99 |
| ZEC-ARX-BAL | RX-50 Cutter for Metals, 30/35 flute | $29.99 |
| ZEC-ARX-PSF | RX-50 Cutter for Coated Metals, 35/24 flute | $29.99 |
| ZEC-ARX-RAC | RX-50 Cutter for Plastics, 30/42 flute | $29.99 |
| ZM-12 | Spindle motor EGX-20 | $180.00 |
| ZM-23 | Spindle Motor Unit, (PNC-2300) | $225.00 |
| ZS-20 | Spindle for EGX-20 | $240.00 |
| ZS-23 | Spindle Unit, PNC-2300 | $275.00 |
| ZS-600 | Spindle for EGX-400/600 | $650.00 |
| ZV-20 | Machine XY Vise, EGX-20 | $274.99 |
| ZV-23A | Vacuum table, PNC-2300 | $178.00 |
| ZV-23C | Machine Vice, PNC-2300 / EGX-300 | $320.00 |
|
| Other |
|
| Part No |
Description |
Price |
| XY-IPC-2 | Cable, 6ft. Parallel (F2A032x06) | $24.99 |
| XY-RS-23A | Cable, Serial 6ft Shielded, (DB9F/DB25M) | $24.99 |
